Buy Nad T187 <2026 Release>

Cement Based Adhesive

Monneli Arredo Colla

Cementitious Adhesive for Natural & Artificial Stone

Uses
ARREDO COLLA is used as an adhesive for fixing internally and externally natural or artificial stone, on both walls and floors. It can be used also for fixing of the following:
All types of ceramic tiles
Vitreous mosaic
Klinker tiles
Porcelanized gres
Single-fired tiles and low porosity materials
Tiles on top of old ceramic floors, marble or natural stones
back to Tile Adhesives
Technical Information
Product Description

A powder grey adhesive for natural and artificial stone. It has a base of special binders combined with selected aggregates of a suitable granulometric size and special additives. ARREDO COLLA has a rapid setting and hydration time which prevent vertical slipping, it is a single component and therefore easy to apply by simply adding water.

Advantages
  • Fast-Setting
  • Vertical slip resistant
  • Easily workable
  • Water resistant
  • Eco-friendly
  • Formulated to suit Middle East condition
Compiliance Standard
  • European Directive UEATC
  • BS 5980 – 1980
  • DIN 18156 – 2nd part
  • ANSI A 118.4 – 1992
Packaging, Coverage / Consumption

Packaging:

ARREDO COLLA is supplied in 25kg bags.

 

Consumption: 

From 4 - 8 Kg / m² according to the type of support and stone.

Shelf Life & Storage

Storage:

Store in dry covered place in the original closed bags

 

Shelf life:

12 months if stored as recommended.

Colors
Grey or white
Technical Properties
PROPERTIES RESULTS
Appearance  Powder
Color  Grey or white
Density  1.7 kg/L
Flexural strength  6.5 N/mm2
Compressive strength  19 N / mm² 
Adhesion strength 1.8 N / mm²
Vertical sliding None
Water resistance Excellent
Aging resistance Excellent
Flexibility Very good
Open time at 25ºC 25 minutes
Grouting After 24 hours
Full strength After 15 days
Inflammability No
Service temperature From  -50C to +800C
All values are subject to 5-10 % tolerance

Unlike standard processors that become obsolete, the T187 can be upgraded. For example, older units can be fitted with the VM300 and AM230 modules to support 4K/HDR video and Dolby Atmos .

The is a 7.1-channel AV surround sound tuner preamplifier designed for audiophiles who want high-end home theater performance without the bulk of a full receiver. Its standout feature is Modular Design Construction (MDC) , which allows you to swap out internal cards to keep the unit current with new audio and video standards. Key Features & Performance

It includes Audyssey MultEQ XT , which uses a supplied microphone to automatically calibrate your speakers to your room's specific acoustics.

The base model typically features 7 HDMI inputs and 2 outputs, supporting 3D and HD video up to 1080p. Review Summary T 187 Surround Sound Preamp Processor - The Audio Factory

Reviewers from Stereophile and HomeTheaterHiFi describe the sound as "full-bodied" with a smooth yet detailed treble. It uses high-quality 24-bit/192kHz Burr Brown DACs to prioritize musicality.

Additional Information
Health & Safety

ARREDO COLLA is a cement-based product. During application, wear appropriate protective clothing, goggles, gloves and respiratory equipment if necessary.

In case of contact with skin, rinse with water and again wash thoroughly with soap and water. In case of contact with eyes, rinse with plenty of water and seek medical advice accordingly.

If ingested, obtain medical attention immediately. Do not induce vomiting.

Important note

The information in this Technical Data Sheet is based on Colmef Monneli’s experience. Colmef Monneli does not accept any liability arising from the use of its products as it has no direct or continuous control over where or how its products are applied. All Colmef Monneli’s Data Sheets are updates on regular basis. It is the user’s responsibility to obtain the latest version.

additional materials
Fast Download
Technical Properties Sheet
download (*.pdf 0.32Mb)
OTHER PRODUCTS
More Products from this section
Monneli Adercol

Two Component Fast - Setting Cementitious Tile Adhesive

Monneli Elastokol

Synthetic Latex Additive for Tile Adhesive buy nad t187

Monneli Maxicol

Polymer Modified Floor Tile Adhesive Up To 15 mm Thick Mortar Unlike standard processors that become obsolete, the T187

Monneli Maxicol T50

THICK BED TILE ADHESIVE FOR INTERIOR & EXTERIOR USE Its standout feature is Modular Design Construction (MDC)

Monneli Neofil F10

Adhesive & Grout for Glass, Ceramic Marble Mosaics

view more
RANDOM PRODUCT
Monneli Betopoxy 200

Low Viscosity Epoxy Injection Resin

Uses
BETOPOXY 200 is used for the following:
Structural restoring
Consolidating of damaged concrete for beams, pillars
Cement screeds cracks sealing
Vertical and oblique anchorage with high pull out resistance, etc.
Injecting into concrete and masonry cracks
To seal and bond cracks widths between 0.2 to 8 mm
Contact us
Choose a location
P.O. Box: 123808, Dubai
Toll: +971 4 8803488
Fax: +971 4 8803450
Site Map