Chair.rar -

: The rocking motion can cause screws to loosen over time; check them every few months.

Typically made of maple or walnut. 4x Screws & Washers: To attach the base to the shell. 4x Screws: To attach the runners to the base. Allen Key/Wrench: Often included in the kit. 2. Step-by-Step Assembly

: Place the seat shell upside down on a soft surface (like a rug or the shipping box) to prevent scratching. Locate the four circular shock mounts on the bottom. Chair.rar

The (or Eames RAR ) is a design classic known as the Rocking Armchair Rod Base . Whether you have an original Vitra/Herman Miller or a high-quality replica, the assembly generally follows a simple four-part process. 1. Inventory Check Before starting, ensure you have the following components: 1x Seat Shell: Usually molded plastic or fiberglass. 1x Eiffel Base: The wire "rod" structure.

: Place the assembled wire-and-runner base onto the bottom of the seat shell. Align the four holes in the base with the shock mounts. : The rocking motion can cause screws to

: Insert the four main screws through the base into the seat shell. Tighten them in a diagonal pattern (like lug nuts on a car tire) to ensure even pressure and prevent the shock mounts from pulling.

: Flip the chair over and give it a test rock. If it feels wobbly, slightly loosen the runner screws, let the chair settle on a flat surface, and then re-tighten everything. Maintenance Tips 4x Screws: To attach the runners to the base

Tip: Do not tighten completely until both runners are aligned to ensure the chair rocks evenly.