Once the loader displays "Completed" or "100%", wait for the receiver to reboot itself. Do not power off the device during the writing stage (80%–100%) to avoid "bricking" the unit. 3. Troubleshooting Tips
Always back up your current channel list to a USB drive before performing a full software flash, as this process will wipe all user settings. Once the loader displays "Completed" or "100%", wait
Click "Open" or "File" and select the firmware .bin file you extracted. Press the Start button on the loader. Immediately power on the receiver. Once the loader displays "Completed" or "100%", wait
Once the loader displays "Completed" or "100%", wait for the receiver to reboot itself. Do not power off the device during the writing stage (80%–100%) to avoid "bricking" the unit. 3. Troubleshooting Tips
Always back up your current channel list to a USB drive before performing a full software flash, as this process will wipe all user settings.
Click "Open" or "File" and select the firmware .bin file you extracted. Press the Start button on the loader. Immediately power on the receiver.
